Easy Installation Guide

Equipment needed

Mesuring tape

Sponge, bucket
with water & soap

Masking tape


  • Prior to installation, the vehicle must be warm (above 15° C).
  • Manipulate with care as colored trim have limited flexibility.
  • When washing your vehicle, avoid excessive use of silicon based products as it may infiltrate under the moldings and decrease the adhesion strength.


The surfaces must be clean and dry. Use a cleaning product compatible with your vehicle.

2.Place guide

Use masking tape to guide yourself and determine desired height and angle before installing the moldings. Measure from the bottom of the door.


Remove red liner and place the moldings on the vehicle following the guide. Gently stick them on the vehicle to allow repositioning. Once correctly installed, firmly press into position with a clean soft cloth.


Don't have your moldings yet?